WJ-400B Melt Flow Rate Tester
The melt flow rate meter is an instrument used to measure the mass flow rate (MFR; unit: g/10min) of thermoplastic melts, in accordance with GB/T3682-2018, ASTM D1238 standards, and similar standards such as JB/T5456 and ISO1133. Widely used for determining the melt index value of thermoplastic materials.
1、 Compliant with standards
This instrument complies with the requirements of JB/T5456 standard and is applicable to standards such as GB/T3682, ASTM D1238, ISO1133, etc.
GBT 3682.1-2018 Plastics Thermoplastics Determination of Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Part 1: Standard Method
GBT 3682.2-2018 Plastics Thermoplastics Determination of Melt Mass Flow Rate (MFR) and Melt Volume Flow Rate (MVR) Part 2: Test Methods for Time Temperature History and/or Humidity Sensitive Materials
2、 Technical parameters
1. Display mode: LCD display.
2. Measurement method: Quality Method (MFR).
3. Constant temperature range: Any point between room temperature and 450 ℃ can be kept at a constant temperature. (You can adjust the temperature by yourself)
4. Temperature accuracy: ± 0.2 ℃.
5. Temperature resolution: 0.1 ℃.
6. Timing range: 0.01-999.00 seconds.
7. Timing accuracy: 0.1 seconds.
8. Cutting methods: automatic, manual, and time controlled.
9. Automatically calculate the melt index, equipped with a printer that can print test reports.
10. Material of mouth mold: tungsten carbide.
11. Melt flow rate test range: 0.001~300g/10 min
12 Control modes: Dual temperature control (temperature control for the upper and lower parts of the barrel mold)+SSR+electric heating element
13 Heating time: 10 minutes
14 port plug gauge: aperture 2.090-2.100 mm
15 piston: Φ (9.474 ± 0.005) mm
16 Fine Mesh Mold: Made of Tungsten Carbide Material
Aperture: (2.095 ± 0.005) mm
Length: (8.000 ± 0.001) mm
17 has over temperature protection function, and heating will automatically stop when the temperature reaches the limit value.
18 day round the clock start-up test, capable of running 24 hours a day, with high efficiency throughout the year.
Chengde Wanji Instrument Manufacturing Co., Ltd. specializes in producing various specifications of melt flow rate measuring instruments, suitable for special working conditions such as corrosion resistance, high temperature resistance, high melt index, and high viscosity. We are a professional supplier of material testing equipment.
